Product ID:E-761 EPOXY KEVLAR PREPREG
MSDS Date:11/20/1995
FSC:8040
NIIN:01-389-6934
MSDS Number: BZGDM

FIBERCOTE INDUSTRIES INC

172 E AURORA ST
WATERBURY, CT 06725-5000
US

Emergency Phone: 203/755-1344

Info Phone: 203/755-1344

Cage: 57929

FIBERCOTE INDUSTRIES INC

WATERBURY, CT 06725 US

Telephone: 203-755-1344

Cage: 57929

WOVEN ARAMID (KEVLAR) FABRIC

Fraction By Weight: 50-60%

CATALYZED EPOXY MIXTURE

Fraction By Weight: 40-50%

RESIDUAL ORGANIC SOLVENTS

Fraction By Weight: <2%

ACETONE; DIMETHYL KETONE; 2-PROPANONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: <10%

OSHA PEL 2400 MG/CUM

ACGIH TLV: 750 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <1.5%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

DIMETHYL FORMAMIDE (SUSPECTED HUMAN CARCINOGEN BY

CAS: 68-12-2

RTECS: LQ2100000

Fraction By Weight: <1%

OSHA PEL 30 MG/CUM

ACGIH TLV: 30 MG/CUM (SKIN)

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED EXPOSURE CAN CAUSE
IRRITATION/DERMATITIS. INHALATION: EXCESSIVE EXPOSURE CAN CAUSE
NASAL/RESPIRATORY IRRITATION. INGESTION: GI IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:IRRITATION, FATIGUE, WEAKNESS, CONFUSION,
EUPHORIA, DIZZINESS, HEADACHE, NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:PREEXISTING DERMAL, BRONCHIAL &
RESPIRATORY PROBLEMS.

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH THOROUGHLY W/MILD
SOAP & WATER. INGESTION: INDUCE VOMITING. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Flash Point Method:TCC
Flash Point:-15F
Lower Limits:2.6
Upper Limits:12.8
Extinguishing Media:DRY CHEMICAL, WATER, FOG
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT W/SCBA.

Handling and Storage Precautions:KEEP SEALED TO AVOID ABSORPTION OF
WATER FROM HUMID AIR. KEEP AWAY FROM HEAT. STORE UNDER CONTROLLED
LOW TEMP CONDITIONS. STORE AT 0F IF POSSIBLE
Other Precautions:AFTER LOW TEMP STORAGE, ALLOW PACKAGE TO RETURN TO
ROOM TEMP BEFORE OPENING.

Respiratory Protection:NIOSH APPROVED RESPIRATORY PROTECTION.
Ventilation:LOCAL EXHAUST RECOMMENDED WHEN CURING. MECHANICAL(GENERAL):
RECOMMENDED.
Protective Gloves:RUBBER, VINYL/OTHER OSHA APPROVED GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health

Solubility in Water:INSOLUBLE
Appearance and Odor:NATURAL PREIMPREGNATED ARAMID CLOTH W/MILD
NON-RESIDUAL ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES & OXIDIZERS WILL CURE
Stability Condition to Avoid:ELEVATED TEMP WILL CURE
Hazardous Decomposition Products:ALDEHYDES, PHENOLICS, CO, CO2 & OXIDES
OF NITROGEN
Conditions to Avoid Polymerization:UNCONTROLLED HEAT MAY CAUSE RUNAWAY
EXOTHERM.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.